Sms Password And Installer Code - Eldes esim364 Installation Manual

6. SMS PASSWORD AND INSTALLER CODE

For security reasons, the system uses the following type of password and code:
SMS password – 4-digit password used for system arming/disarming and configuration by SMS text messages. By default, SMS password is
0000, which MUST be changed!. SMS password is authorized to carry out the following:
• Access system configuration by SMS text messages.
• Arm/disarm partition.
• Activate/deactivate service mode.
• Set system date and time.
• Add/remove user phone numbers.
• Set SMS password.
• Turn ON/OFF PGM outputs.
• Restart system remotely.
Installer code – 4-digit password used for system configuration by EKB2/EKB3/EKB3W keypad and ELDES Configuration Tool software. By
default, installer code is 1470, which is highly recommended to change. Installer code is authorized to carry out the following:
• Access system configuration by keypad and ELDES Configuration Tool software.
• Set installer code.
• Set master code.
• Activate/deactivate service mode.
• Set system date and time.
• Add/remove user phone numbers.
• Set SMS password.
• Restore system configuration to default.
• Clear tamper fault (if enabled).
Set SMS password
Set installer code
30 30 EN
SMS text message content:
wwww_PSW_ssss
SMS
Value: wwww – 4-digit existing SMS password; ssss – 4-digit new SMS password; range –
[0001... 9999].
Example: 0000_PSW_1111
Menu path:
EKB2
OK → iiii → OK → PRIMARY SETTINGS → OK → SMS PASSWORD → OK → ssss → OK
Value: iiii – 4-digit installer code; ssss – 4-digit new SMS password; range – [0001... 9999].
Enter parameter 14 and new SMS password:
EKB3/
14 ssss #
EKB3W
Value: ssss – 4-digit new SMS password; range – [0001... 9999].
Example: 141111#
Config
This operation may be carried out from the PC using the ELDES Configuration Tool software.
Tool
Menu path:
EKB2
OK → 1470 → OK → PRIMARY SETTINGS → OK → INSTALLER CODE → OK → iiii → OK
Value: iii – 4-digit new installer code; range – [0000... 9999].
Enter parameter 16 and new installer code:
EKB3/
16 iiii #
EKB3W
Value: iiii – 4-digit new installer code; range – [0000... 9999].
Example: 162538#
ESIM364 INSTALLATION MANUAL v1.9