Auto Run Mode; Built-In Programs; Dmx Addressing/ Dmx Configuration - SHOWTEC compact par 7 q4 User Manual

Compact Par 7 Q4

Auto Run Mode

With this menu you can start the Auto Run program of the Compact Par 7 Q4.
01) Press the Mode button and then the Up/Down buttons, until the display shows
02) The Compact Par will start immediately the Auto Run program.

Built-in Programs

With this menu you can set the built-in programs.
01) Press the Mode button and then the Up/Down buttons, until the display shows
02) Press the Setup button to open this menu.
03) You can use the Up/Down buttons to scroll through the 16 built-in programs.
04) When you select menu
to enter and choose one with the Up/Down buttons.
05) Press the Setup button to open menu
the Up/Down buttons.
06) Press the Setup button again, until the display shows
07) Use the Up/Down buttons until the display shows
08) Use the Up/Down buttons to scroll between
you can switch between the Flash frequency and the Program Running Speed by pressing the Setup
button.
09) Use the Up/Down buttons to change the values.

DMX Addressing/ DMX configuration

With this menu you can set the DMX address and choose a DMX configuration.
01) Press the Mode button and then the Up/Down buttons, until the display shows
02) Press the Setup button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up/Down buttons to select the required address from
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04) Press the Setup button to choose one of the 3 different DMX Modes. Use the Up/Down buttons to
select 4, 6 or 11 channels DMX mode.
Ordercode: 42582
, you can use a wide variety (33) of manual color settings. Press Setup
14
. You can set the Flash frequency with
.
.
In menu
Speed from 00-99 and FL.
Flash Frequency from 00-99
.
.
,
.
.