General Setup - Draytek VIGOR2925 SERIES User Manual

Specify routing policy to determine the direction of the data transmission.
Note: For more detailed information about using policy route, refer to Support
>>FAQ/Application Notes on www.draytek.com.
4 . 3 . 1 G e n e r a l S e
4 . 3 . 1 G e n e r a l S e
Available settings are explained as follows:
Item
Index
Enable
Protocol
Interface
Priority
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
t u p
t u p
Description
Click the number of index to access into the configuration
web page.
Check this box to enable this policy.
Display the protocol used for this policy.
Display the interface to send packets to once the policy is
matched.
Display the priority value for such route policy profile.
Display the IP address for the start of the source IP.
Display the IP address for the end of the source IP.
Display the IP address for the start of the destination IP.
Display the IP address for the end of the destination IP.
Display the IP address for the start of the destination port.
Display the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
243
Vigor2925 Series User's Guide