Draytek VIGOR2925 SERIES User Manual page 239

Hide thumbs Also See for VIGOR2925 SERIES:

Table of Contents

192.168.1.254.

IP Pool Counts - Enter the maximum number of PCs that

you want the DHCP server to assign IP addresses to. The

default is 50 and the maximum is 253.

Lease Time - Enter the time to determine how long the IP

address assigned by DHCP server can be used.

Use LAN Port – Specify an IP for IP Route Subnet. If it is

enabled, DHCP server will assign IP address automatically

for the clients coming from P1 and/or P2. Please check the

box of P1 and P2.

Use MAC Address - Check such box to specify MAC

MAC Address: Enter the MAC Address of the host one by

one and click Add to create a list of hosts to be assigned,

deleted or edited from above pool. Set a list of MAC

Address for 2

DHCP server will help router to assign the

correct IP address of the correct subnet to the correct host.

So those hosts in 2

subnet won't get an IP address

belonging to 1

Add – Type the MAC address in the boxes and click this

button to add.

Delete – Click it to delete the selected MAC address.

Edit – Click it to edit the selected MAC address.

Cancel – Click it to cancel the job of adding, deleting and

When you finish the configuration, please click OK to save and exit this page.

Vigor2925 Series User's Guide