Telnet Command: Object Service Grp - Draytek VIGOR2925 SERIES User Manual

> object service obj 1 -n limit
> object service obj 1 -p 255
> object service obj 1 -s 1 120 240
> object service obj 1 -d 1 200 220
> object service obj 1 -v
Service Object Profile 1
Name
Protocol:[255]
Source port check action:[!=]
Source port range:[120~240]
Destination port check action:[!=]
Destination port range:[200~220]
T e l n e t C o m m
T e l n e t C o m m
This command is used to integrate several service objects under a service group profile.
object service grp setdefault
object service grp INDEX -v
object service grp INDEX -n NAME
object service grp INDEX -a SER_OBJ_INDEX
S y n t a x
S y n t a x
Parameter
setdefault
INDEX
-v
-n NAME
-a SER_OBJ_INDEX
E x a m p
E x a m p
> object service grp 1 -n Grope_1
Service Group Profile 1
Name
Included service object index:
[0:][0]
[1:][0]
[2:][0]
[3:][0]
Vigor2925 Series User's Guide
:[limit]
a n d : o b j e c t s e r v
a n d : o b j e c t s e r v
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
It means to view the information of the specified group
profile.
Example:
It means to define a name for the service group.
NAME: Type a name with less than 15 characters.
Example:
It means to specify service object profiles for the group
profile.
Example:
The service object profiles with index number 1,2,3,4 and 5
will be group under such profile.
l e
l e
:[Grope_1]
i c e g r p
i c e g r p
object service grp 1 -v
object service grp 8 -n bruce
:object service grp 3 -a 1 2 3 4 5
654