General Setup - Draytek Vigor2120 series User Manual

when WAN1 and WAN2 are not available, the router will use 3.5G for supporting
automatically. The supported 3G USB Modem will be listed on DrayTek web site. Please visit
www.draytek.com for more detailed information.
Below shows the menu items for WAN.
4 . 1 . 2 G e n e r a l S e
4 . 1 . 2 G e n e r a l S e
This section will introduce some general settings of Internet and explain the connection modes
for WAN1 and WAN2 in details.
This router supports multiple-WAN function. It allows users to access Internet and combine
the bandwidth of the multiple WANs to speed up the transmission through the network. Each
WAN port can connect to different ISPs, Even if the ISPs use different technology to provide
telecommunication service (such as DSL, Cable modem, etc.). If any connection problem
occurred on one of the ISP connections, all the traffic will be guided and switched to the
normal communication port for proper operation. Please configure WAN1 and WAN2 settings.
WAN1 is fixed with physical mode of Ethernet.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
t u p
t u p
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose
Auto negotiation for determined by the system.
105
Vigor2120 Series User's Guide