Draytek VIGOR2925 SERIES User Manual page 766

S y n t a x
S y n t a x
Parameter
set
edit
account
User Set
-a[Profile idx][User
name][IP_Address]
-e
-d
-l all
-l userl
-l ip
-o
-c[user name]
-c all
-buser [user name]
-b ip [ ip address]
-u user [user name]
-u ip [ ip address]
-r [user name | all]
-q
-s
User edit
PROFILE_IDX
-a [0/1]
-b [0/1]
-c [0/1]
-e
-d
-f [0/1]
Vigor2925 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to configure general setup for the user management.
It means to modify the selected user profile.
It means to set time and data quota for specified user account.
It means to pass an IP Address.
Profile idx- type the index number of the selected profile.
User name- type the user name that you want it to pass.
IP_Address- type the IP address that you want it to pass.
Enable User management function.
Disable User management function.
Show online user.
all – all of the users will be displayed on the screen.
user name – type the user name that you want to view on the
screen.
ip – type the IP address that you want to view on the screen.
It means to show user account information.
e.g.,-o
Clear the user record.
user name – type the user name that you want to get clear
corresponding record.
all – all of the records will be removed.
Block specifies user or IP address.
user name – type the user name that you want to block.
ip address –– type the IP address that you want to block.
Unblock specifies user or IP address.
user name – type the user name that you want to unblock.
ip address –– type the IP address that you want to unblock.
Remove the user record.
user name – type the name of the user profile.
all – all of the user profile settings will be removed.
It means to trigger the alert tool to do authentication.
It means to set login service.
0:HTTPS
1:HTTP
e.g.,-s 1
Type the index number of the profile that you want to edit.
Enable the internal RADIUS server for such user profile.
1: Enable;
0: Disable.
Set the phase 1 method for internal RADIUS server.
1: PEAP;
0: None.
Set the phase 2 method for internal RADIUS server.
1: MSCHAPV2;
0: None.
Enable User profile function.
Disable User profile function.
Enable or disable the local 802.1x server for such user
profile.
1: Enable;
750