Draytek VIGOR2925 SERIES User Manual page 317

Available settings are explained as follows:
Item
Name
Interface
Address Type
MAC Address
Start IP Address
End IP Address
Subnet Mask
Invert Selection
Description
Type a name for this profile. Maximum 15 characters are
allowed.
Choose a proper interface.
For example, the Direction setting in Edit Filter Rule will
ask you specify IP or IP range for WAN or
LAN/DMZ/RT/VPN or any IP address. If you choose
LAN/DMZ/RT/VPN as the Interface here, and choose
LAN/DMZ/RT/VPN as the direction setting in Edit Filter
Rule, then all the IP addresses specified with
LAN/DMZ/RT/VPN interface will be opened for you to
choose in Edit Filter Rule page.
Determine the address type for the IP address.
Select Single Address if this object contains one IP address
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet
for IP address.
Select Any Address if this object contains any IP address.
Select Mac Address if this object contains Mac address.
Type the MAC address of the network card which will be
controlled.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is
selected.
Type the subnet mask if the Subnet Address type is
selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
301
Vigor2925 Series User's Guide