Draytek VIGOR2925 SERIES User Manual page 746

txburst [enable]
ssid[ssid_num enable
ssid_name [hidden_ssid]]
Security
[SSID_NUMBER]
[mode][key][index]
ratectl [ssid_num enable
upload download]
Vigor2925 Series User's Guide
field. However, some original 11b wireless network devices
only support long preamble.
0: disable to use long preamble.
1: enable to use long preamble.
It means to enhance the performance in data transmission
about 40%* more (by enabling Tx Burst). It is active only
when both sides of Access Point and Station (in wireless
client) invoke this function at the same time.
0: disable the function.
1: enable the funciton.
It means to set the name of the SSID, hide the SSID if
required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3
or SSID4.
ssid_name: Give a name for the specified SSID.
hidden_ssid: Type 0 to hide the SSID or 1 to display the
SSID
It means to configure security settings for the wirelesss
connection.
SSID_NUMBER: Type 1, 2, 3 or 4 to specify SSID1, SSID2,
SSID3 or SSID4.
mode: Available settings are:
disable:
wpa1x:
wpa21x:
wpamix1x: Mixed (WPA+WPA2/802.1x only)
wep1x:
wpapsk:
wpa2psk:
wpamixpsk:
wep:
key, index: Moreover, you have to add keys for wpapsk,
wpa2psk, wpamixpsk and wep, and specify index number of
schedule profiles to be followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26
Hexadecimal digit format; WPA keys must be in 8~63 ASCII
text string or 64 Hexadecimal digit format.
It means to set the rate control for the specified SSID.
ssid_num: Choose 1, 2, 3 or 4 to specify SSID1, SSID2,
SSID3 or SSID4.
enable: It means to enable the function of the rate control for
the specified SSID. 0: disable and 1:enable.
upload: It means to configure the rate control for data upload.
The unit is kbps.
download: It means to configure the rate control for data
download. The unit is kbps.
730
No security.
WPA/802.1x Only
WPA2/802.1x Only
WEP/802.1x Only
WPA/PSK
WPA2/PSK
Mixed (WPA+WPA2)/PSK
WEP