Telnet Command: Ip6 Mngt - Draytek VIGOR2925 SERIES User Manual

-r [num]
E x a m p l e
E x a m p l e
> ip6 radvd -s 1 1800
> ip6 radvd -V
% IPv6 Radvd Config:
Radvd : Enable, Default Lifetime : 1800 seconds
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to manage the settings for access list.
ip6 mngt list
ip6 mngt list [add<index> <prefix> <prefix-length>|remove <index>|flush]
ip6 mngt status
ip6 mngt [http|telnet|ping|https|ssh] [on|off]
S y n t a x D e
S y n t a x D e
Parameter
list
status
add
index
prefix
prefix-length
remove
flush
http|telnet|ping|https|ssh
on|off
E E x x a a m m p p l l e e
> ip6 mngt list add 1 FE80::250:7FFF:FE12:1010 128
> ip6 mngt list add 2 FE80::250:7FFF:FE12:1020 128
> ip6 mngt list add 3 FE80::250:7FFF:FE12:2080 128
> ip6 mngt list
% IPv6 Access List :
Index IPv6 Prefix
========================================
1 FE80::250:7FFF:FE12:1010
2 FE80::250:7FFF:FE12:1020
It means RA test for item [num].
: i p 6 m n g t
: i p 6 m n g t
s c r i p t i o n
s c r i p t i o n
Description
It means to show the setting information of the access list.
It means to show the status of IPv6 management.
It means to add an IPv6 address which can be used to execute
management through Internet.
It means the number (1, 2 and 3) allowed to be configured for
IPv6 management.
It means to type the IPv6 address which will be used for
accessing Internet.
It means to type a fixed value as the length of the prefix.
It means to remove (delete) the specified index number with
IPv6 settings.
It means to clear the IPv6 access table.
These protocols are used for accessing Internet.
It means to enable (on) or disable (off) the Internet accessing
through http/telnet/ping.
Prefix Length
128
128
623
Vigor2925 Series User's Guide