General Setup - Draytek Vigor2760 series User Manual

3 . 1 . 2 G e n e r a l S e
3 . 1 . 2 G e n e r a l S e
This section will introduce some general settings of Internet and explain the connection modes
for WAN1, WAN2 and WAN3 in details.
This router supports multiple-WAN function. It allows users to access Internet and combine
the bandwidth of the multiple WANs to speed up the transmission through the network. Each
WAN port can connect to different ISPs, Even if the ISPs use different technology to provide
telecommunication service (such as DSL, Cable modem, etc.). If any connection problem
occurred on one of the ISP connections, all the traffic will be guided and switched to the
normal communication port for proper operation. Please configure WAN1, WAN2, and
WAN3 settings.
This webpage allows you to set general setup for WAN1, WAN2, and WAN3 respectively. In
default, WAN2 is disabled. If you want to enable it, simply click the WAN2 link and select
Yes in the field of Enable.
Available settings are explained as follows:
Item
Index
Enable
Physical Mode / Type
Note: In default, each WAN port is enabled.
After finished the above settings, click OK to save the settings.
t u p
t u p
Description
Click the WAN interface link under Index to access into the
WAN configuration page.
V means such WAN interface is enabled and ready to be
used.
Display the physical mode and physical type of such WAN
interface.
79 Vigor2760 Series User's Guide