Draytek VIGOR2925 SERIES User Manual page 409

Status
Click each index to edit one remote user profile. Each Dial-In Type requires you to fill the
different corresponding fields on the right. If the fields gray out, it means you may leave it
untouched. The following explanation will guide you to fill all the necessary fields.
Available settings are explained as follows:
Item
User account and
Authentication
Allowed Dial-In Type
Display the access state of the specific dial-in user. The
symbol V and X represent the specific dial-in user to be
active and inactive, respectively.
Description
Enable this account - Check the box to enable this
function.
Idle Timeout- If the dial-in user is idle over the limitation
of the timer, the router will drop this connection. By
default, the Idle Timeout is set to 300 seconds.
PPTP - Allow the remote dial-in user to make a PPTP VPN
connection through the Internet. You should set the User
Name and Password of remote dial-in user below.
IPSec Tunnel - Allow the remote dial-in user to make an
IPSec VPN connection through Internet.
L2TP with IPSec Policy - Allow the remote dial-in user to
make a L2TP VPN connection through the Internet. You
393
Vigor2925 Series User's Guide