Additional Information; Screen Sizes And Disc Formats; Setting The Tv System; (Not North American Model) - Onkyo DV-SP503E Instruction Manual

Additional information

Screen sizes and disc formats

DVD-Video discs come in several different screen aspect
ratios, ranging from TV programs, which are generally
4:3, to Cinema- Scope widescreen movies, with an
aspect ratio of up to about 7:3.
Televisions, too, come in different aspect ratios; "stan-
dard" 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen setting
(page 46) of this player should be set to "16:9 (Wide)".
When you watch discs recorded in 4:3 format, you can
use the TV controls to select how the picture is pre-
sented. Your TV may offer various zoom and stretch
options; see the instructions that came with your TV for
details.
Please note that some movie aspect ratios are wider than
16:9, so even though you have a widescreen TV, these
discs will still play in a "letter box" style with black bars
at the top and bottom of the screen.
Standard TV users
If you have a standard TV, the "TV Screen" setting
(page 46) of this player should be set to "4:3 (Letter
Box)" or "4:3 (Pan&Scan)", depending on which you
prefer.
Set to "4:3 (Letter Box)", widescreen discs are shown
with black bars top and bottom.
Set to "4:3 (Pan&Scan)", widescreen discs are shown
with the left and right sides cropped.
Although the picture looks larger, you don't actually see
the whole picture.
Please note that many widescreen discs override the
player's settings so that the disc is shown in letter box
format regardless of the setting.
Note:
• Using the "16:9 (Wide)" setting with a standard 4:3
TV, or either of the "4:3" settings with a widescreen
TV, will result in a distorted picture.
54
Downloaded From Disc-Player.com Onkyo Manuals
Setting the TV system (Not North
American model)
The default setting of this player is AUTO, and unless
you notice that the picture is distorted when playing
some discs, you should leave it set to AUTO. If you
experience picture distortion with some discs, set the TV
system to match your country or region's system. Doing
this, however, may restrict the kinds of disc you can
watch. The table below shows what kinds of disc are
compatible with each setting (AUTO, PAL and NTSC).
STANDBY/ON
STANDBY/ON
DISPLAY PLAY MODE
ST ANDBY
DIMMER CLEAR
1
If the player is on, press STANDBY/
ON to switch it to standby.
STANDBY/ON
ST ANDBY
2
Using the front panel controls,
hold down
STANDBY/ON to switch the TV sys-
tem.
The TV system changes as follows:
STANDBY/ON →
• AUTO
→
• NTSC
→
• PAL AUTO
ST ANDBY
Note:
• You have to switch the player into standby (press
STANDBY/ON) before each change.
Disc
Type Format NTSC
DVD/ NTSC NTSC
Super
NTSC
PAL
VCD
NTSC NTSC
Video CD
PAL NTSC
CD/SACD NTSC
–
no disc
TOP MENU MENU
RETURN SETUP
O
then press
NTSC
PAL
Player setting
PAL AUTO
PAL NTSC
PAL PAL
PAL NTSC
PAL PAL
PAL NTSC or
PAL