Using The Remote Controller With Other Brand's Tvs (North American Model Only) - Onkyo DV-SP503E Instruction Manual

Using the Remote controller with Other Brand's
TVs (North American model only)
Learning a pre-programming code
Numbers
On/
Standby
You can make RC-582DV remote controller to operate a
TV from other brand than Onkyo by storing the pre-pro-
gramming code of the brand in the RC-582DV.
1 Find the 3-digit number for the
brand name of the component that
you want to operate in the table on
page 59.
2
Turn on the TV that you want to
operate.
3
While holding down the ON/
ON /
STANDBY on the RC-582DV that
STANDBY
you want to program, press Enter,
and then release both buttons.
(Make sure you press ON/STANDBY
before Enter.)
ENTER
4
Within 10 seconds, enter the 3-
digit code number.
1 2 3
4 5 6
7 8 9
0
58
Downloaded From Disc-Player.com Onkyo Manuals
ON STANDBY
OPEN /
CLOSE
PLAY MODE
1 2 3
DISPLAY
4 5 6
DIMMER
7 8 9
0 CLEAR
TOP MENU MENU
/ / /
ENTER
Enter
RETURN SETUP
AUDIO ANGLE SUBTITLE ZOOM
TV CONTROL
TV/ VIDEO CHANNEL
TV Control
ON /
STANDBY VOLUME
RC-582DV
5
Press some operation buttons for
the component that you want to
operate to check if the system
operates properly.
If the system operates properly, the code
is correct. If the component does not
operate properly, return to step 2.
Notes:
• With some brand's components, some buttons may
not work correctly.
• If more than one code is given in the table, try the code
one by one until you reach the code for your compo-
nent (i.e. if the first code does not work, then try the
next).
• The code can be retained by changing the batteries
within 1 minute. If the code is lost, store the pre-pro-
gramming code again.
Controlling a TV
1
Press ON/STANDBY to turn on the
ON /
device.
STANDBY
2
Press the desired operation but-
ton.
CHANNEL
+ : Changes the TV channel upward.
– : Changes the TV channel down-
ward.
VOLUME
: Increases the TV volume.
: Decrease the TV volume.
TV/VIDEO:
TV/ VIDEO
Switches the TV/VCR inputs.