Dts Downmix - Onkyo DV-SP503E Instruction Manual

Initial Settings menu—Continued

DTS Downmix

Default setting: STEREO
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
If you've selected DTS > PCM in DTS Out on page 46
or 2 Channel in Audio Output Mode below section, you
can choose the way the signal is downmixed to PCM
audio. Stereo will downmix the DTS signal to 2-channel
stereo, whereas Lt/Rt will downmix to a 2-channel sig-
nal compatible with Dolby surround matrix decoders.
(This allows you to hear surround sound if your AV
receiver or amplifier has Dolby Pro Logic capability.)
Audio Output Mode
Default setting: 2 Channel
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
If you connected this player to your amplifier using the
5.1 channel analog outputs (front, surround, center and
subwoofer outs), set this to 5.1 Channel; if you con-
nected only the stereo outs, set to 2 Channel.
Notes:
• Even if you set Audio Output Mode to 5.1 Channel,
you'll only get sound from all speakers when playing
a 5.1 channel multichannel disc.
• When set to 5.1 Channel, only the front left/right
channels are output from the AUDIO OUT (2ch)
jacks. Change to 2 Channel if you want to listen to
downmixed stereo audio (for example, because you
are listening through the TV's built-in speakers).
• When set to 5.1 Channel there is no digital output
when playing DVD-Audio.
• If you set to 2 Channel, Dolby Digital, DTS and
MPEG audio is mixed down to two channels so you
still hear all the audio recorded on the disc. With DTS
encoded audio, you can choose how the signal is
downmixed to PCM audio. See DTS Downmix above
to change the downmix setting.
• Some DVD-Audio discs don't allow downmixing of
audio. These discs always output multi-channel audio
regardless of the setting made here.
52
Downloaded From Disc-Player.com Onkyo Manuals
Parental Lock STEREO
DVD Playback Mode Lt/Rt
SACD Playback
DTS Downmix
DivX VOD
Audio Output Mode 2 Channel
Speaker Distance 5.1 Channel
Speaker Installation
Speaker Installation
Default settings: L/R: Large, C: Large, LS/
RS: Large, SW: On
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
This setting does not affect digital audio output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
Use the Speaker Installation screen to tell the player
what kinds of speakers you have connected.
1
Use the
buttons to select a speaker.
• The L and R, and RS and LS speakers
are paired; you can't set them differ-
ENTER
ently.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
2
Press (cursor right) to modify
the selected speaker.
3
Use the
buttons to change the current set-
ting.
ENTER
• You can see the effect of your changes
in the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the
main speaker cone in the speaker is
12cm or more, set to Large, otherwise
set to Small (or Off if you don't have
that speaker).
• If you set the front L and R speakers to
Small, the center and surround speak-
ers are automatically set to Small and
the subwoofer to On.
• The subwoofer can only be set to On or
Off.
5.1 Channel
/ (cursor up/down)
L Large
C Large
R Large
RS Large
LS Large
SW On
/ (cursor up/down)