Basic Setup - Onkyo DV-SP503E Instruction Manual

Super audio cd & dvd audio/video player
Hide thumbs Also See for DV-SP503E:
Table of Contents

Advertisement

Connecting the DV-SP503E—Continued

Basic Setup

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In
this setup, stereo audio is played through the speakers in your TV.
AUDIO OUTPUT
FRONT/D. MIX
1
2
SURR
L
R
• This player is equipped with copy protection technol-
ogy. Do not connect this player to your TV via a VCR
using AV cables, as the picture from this player will
not appear properly on your TV. (This player may also
not be compatible with some combination TV/VCRs
for the same reason; refer to the manufacturer for more
information.)
1. Connect the VIDEO OUTPUT and AUDIO OUT-
PUT ANALOG L/R jacks to a set of A/V inputs
on your TV.
Use the supplied AV cable (RCA), connecting the
red and white plugs to the audio outputs and the yel-
low plug to the video output. Make sure you match
up the left and right audio outputs with their corre-
sponding inputs for correct stereo sound.
See the following page if you want to use a compo-
nent or S Video cable for the video connection.
If you need another pair of stereo outputs (and don't
need to use the multichannel analog outputs), you
can use the FRONT/D.MIX 1 or 2 AUDIO OUTPUT
jacks (page 22).
2. Connect the supplied AC power cord to the AC
INLET, then plug into a power outlet.
Downloaded From Disc-Player.com Onkyo Manuals
AV cable
(Supplied)
VIDEO OUTPUT
DIGITAL
COMPONENT
P
CENTER
COAXIAL
Y
B
S VIDEO
SUB
OPTICAL
P
VIDEO
R
WOOFER
VIDEO IN
L
R
ANALOG
INPUT
REMOTE
CONTROL
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
DV - SP 503E
MODEL NO.
RATING:
AC 120V
60 Hz
11 W
To power outlet
Notes:
• Before unplugging the player from the power outlet,
make sure you first switch it into standby using either
the front panel STANDBY/ON button, or the remote
controller, and wait of the "GOOD BYE" message to
disappear from the player's display.
• For the above reasons, do not plug this player into a
switched power supply found on some amplifiers and
AV receivers.
TV
AC INLET
Power cord
(Supplied)
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents