Rear Panel - Onkyo DV-SP503E Instruction Manual

Front & Rear Panels—Continued

Rear Panel

I European Model
1
AUDIO OUTPUT
FRONT/D. MIX
1 2
SURR
L
R
A
AUDIO OUTPUT [22–23]
These jacks output analog audio. The FRONT/
D.MIX jacks can be connected to the stereo input on
a TV, hi-fi amp, or other component. The 1 and 2
jacks output the same signals so you can use either.
DVDs with 5.1-channel audio are downmixed into
two channels before being output by the FRONT/
D.MIX jacks.
If you're using an AV receiver or surround decoder
with a 5.1-channel analog audio input, use the
FRONT/D.MIX 1 or 2 jacks and the SURR L/R,
CENTER, and SUBWOOFER jacks. In this case,
you must set the Audio Output Mode on the Initial
Setup menu to 5.1 Channel. With this setting, the
FRONT/D.MIX jacks will output the front signals,
and the SURR L/R, CENTER, and SUBWOOFER
jacks will output the surround, center, and sub-
woofer signals respectively.
B
COAXIAL DIGITAL AUDIO OUTPUT [22]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
OPTICAL DIGITAL AUDIO OUTPUT [22]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
Downloaded From Disc-Player.com Onkyo Manuals
2 3 4 5 6
VIDEO OUTPUT
COMPONENT
DIGITAL
Y P
CENTER COAXIAL B
S VIDEO
SUB OPTICAL
VIDEO P
R
WOOFER
7
AV CONNECTOR
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
DV - SP 503E
MODEL NO.
RATING: AC 100-240 V
50 /60Hz 12 W
D
VIDEO OUTPUT [19]
This RCA connector can be used to connect a TV or
projector with a composite video input.
E
COMPONENT VIDEO OUTPUT [20]
These jacks output component video and can be
connected to an component video input on a TV or
projector.
F
S VIDEO OUTPUT [20]
This connector can be used to connect a TV or pro-
jector with an S Video input.
G
AV CONNECTOR [20]
This SCART output can be connected to a TV or
projector with a SCART input by using the supplied
SCART cable. This SCART connector outputs 2-
channel stereo audio, composite video, S Video, and
RGB video.
H
jack [23]
These (Remote Interactive) connectors can be
connected to the
Onkyo AV components for interactive control.
Connecting an
system operational. You must also connect the audio
cables as well.
I
AC INLET [24]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
8 9
REMOTE
CONTROL
AC INLET
connectors on your other
cable only does not make the
15