Video Output Settings - Onkyo DV-SP503E Instruction Manual

Initial Settings menu—Continued
Digital Audio Out settings
Setting
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out

Video Output settings

Setting
TV Screen
(See also "Screen sizes
and disc formats" on
page 54.)
Component Out
AV Connector Out
(European model only)
46
Downloaded From Disc-Player.com Onkyo Manuals
Option
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
Down Sample On
Down Sample Off
MPEG > PCM
MPEG
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Progressive
Interlace
Video
S Video
RGB
What it means
Digital audio is output from the digital outputs. Note that there
is no digital output when playing SACDs and some DVD-Audio
discs regardless of this setting.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compati-
ble with DTS audio.)
DTS audio is converted to PCM audio before being output.
96kHz digital audio is converted to 48kHz for digital output.
Note that High sampling rate DVD-Audio discs (192kHz or
176.4kHz) automatically output down-sampled audio through
the digital outputs.
96kHz digital audio is output as is at 96kHz.
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG encoded digital audio is output as is.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
Set if you have a widescreen TV.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). See also "Switching
the video output to interlace using the front panel controls" on
page 21.
Note that progressive scan video is only output from the com-
ponent video jacks.
Set if your TV is not compatible with progressive scan video.
Ordinary (composite) video output, compatible with all TVs.
Almost the same quality as RGB, but can give better results if
you're using a long SCART cable.
If your TV is compatible, this setting gives the best picture
quality.