Table of Contents
Advertisement
Connecting the Power Cord
Before connecting the power cord, connect all of the other components.
Basic Operation
Turning On CD Player
ON/STANDBY
To turn on the CD Player, press the
[
ON/STANDBY] button on the unit or the remote
Í
controller. Press the
[
ON/STANDBY] button again to set the CD
Í
Player to Standby.
Setting Auto Standby (ASb)
ENTER
SETUP
SETUP
1
You can specify that if the CD Player is left stopped
for 30 minutes, the power will automatically turn off,
placing the unit in Standby mode (Auto Standby
function).
On the European model:
The default setting is "On".
On the China model:
The default setting is "Off".
Plug the power cord into a
suitable electrical outlet
DIMMER
DISPLAY
ENTER
SEARCH
MEMORY
2
3
Make settings for this function while playback is
stopped.
1
Press the [SETUP] button.
2
Use the [
] or [
] button to display "ASb";
<
>
then press the [ ENTER ] button.
3
Use the [
] or [
] button to switch "Off" or
<
>
"On"; then press the [ ENTER ] button.
4
"COMPLETE" appears on the display.
Note:
If playback is paused, the power will remain on
even after 30 minutes have elapsed; the Auto
Standby function will not operate.
Changing the Display Brightness
Press the remote controller's [DIMMER]
button repeatedly to select the following
options:
Normal
DIMMER
Dim
Dimmer
En-
15
Advertisement
Table of Contents
