Printer Settings]; [Paper Setting] - Konica Minolta bizhub 4050 User Manual

4.5

[Printer Settings]

4.5 [Printer Settings]

[Paper Setting]

To display: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting]
Configure the paper and paper tray settings used for printing, and the setting on printing condition if no set-
ting is specified by the printer driver.
Settings
[Paper Tray]
[Default Tray]
[Manual Feed]
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
[Duplex]
[Number of Copies]
[Collate]
[Binding Position]
[Auto Tray Switching]
[Tray Mapping]
[Tray Mapping
Mode]
[Logical Tray 0] to
[Logical Tray 9]
[Original Direction]
[Minimal Print]
[Description of Utility Keys]
Description
Configure the settings on the paper tray.
[Tray 2], [Tray 3], and [Tray 4] are displayed when the optional Paper Feed Unit
is installed.
Select a paper tray you want to use preferentially.
[Tray 1] is specified by default.
Specify the size and type of the paper loaded in Manual Feed Tray.
• [Paper Size]: When loading a standard size paper, select the paper size.
• [Custom Size]: Enter the width and length of paper when using custom-size
paper.
• [Paper Type]: Select the type of the paper loaded in the tray.
Specify the size and type of the paper loaded in Tray 1.
• [Paper Size]: When loading a standard size paper, select the paper size.
• [Paper Type]: Select the type of the paper loaded in the tray.
Specify the size and type of the paper loaded in Tray 2.
• [Paper Size]: When loading a standard size paper, select the paper size.
• [Paper Type]: Select the type of the paper loaded in the tray.
Specify the size and type of the paper loaded in Tray 3.
• [Paper Size]: When loading a standard size paper, select the paper size.
• [Paper Type]: Select the type of the paper loaded in the tray.
Specify the size and type of the paper loaded in Tray 4.
• [Paper Size]: When loading a standard size paper, select the paper size.
• [Paper Type]: Select the type of the paper loaded in the tray.
Select whether or not to enable 2-sided printing.
[OFF] is specified by default.
Enter the number of copies to be printed.
[1] is specified by default.
When multiple sets of copies are printed, select whether the paper output po-
sition of each set is staggered to help you locate the first page of each set.
[OFF] is specified by default.
Select the binding position for 2-sided printing.
[Left Bind] is selected by default.
When the paper tray has become empty during printing, select whether or not
to allow automatic switching to a paper tray that contains paper of the same
size, same orientation, and same type (ATS: Auto Tray Switch).
[ON] is specified by default.
Specify the paper tray to be used for printing when a print job is received by a
printer driver manufactured by another company.
Select whether or not to enable the tray mapping.
[OFF] is specified by default.
Assigns logical trays 0 to 9 to physical trays.
Select the orientation of the image to be printed.
[PORTRAIT] is specified by default.
Select whether or not to slightly reduce the full page size when directly printing
a PDF, PPML, or OOXML (docx, xlsx, or pptx) file.
This function is available when printing the entire original image, including its
edges.
[OFF] is specified by default.
4
4-8