2.2
Main Switch
The green illuminated rocker switch works as a global inhibit input.
0
Power outputs disabled
●
I
Switch is lighting, power outputs may be enabled by the remote control.
●
This switch is a logic switch only. It does not disconnect the mains supply.
With the Alphanumeric Display Option the switch is omitted.
2.3
USB Connector
USB Socket
Table 2: USB Connector Pin Assignment
This is the standard USB connector type B.
2.4
Ethernet Connector
RJ45 Socket
Table 3: Ethernet Connector Pin Assignment
This is the standard NIC configuration. You need a 1:1-cable to connect a to a HUB, or a cross-
over cable to connect to another NIC (e.g. a computer). There is no automatic signal crossing like
with some routers.
2.5
Water Cooling Connection (Optional)
The water connections are made with quick couplings series LC 6.4 mm from Colder Products
Company (CPC). We recommend an elbow mating plug with shutoff, e.g. LCD230-04.
Consider that water inlet and water outlet are not exchangeable.
28. May 2013
Pin Signal
Comment
1
VCC
2
D-
3
D+
GND
4
Pin Signal
Comment
1
TX+
2
TX-
3
RX+
4
GND 1
5
GND 1
6
RX-
7
GND 2
8
GND 2
The safety valve may not be readjusted by the customer.
3
*00679.A4