On the right hand side, "on failure:", what would you like the PS to do if there is a supervision
problem: Ignore this failure, Switch channel off, etc
Fig. 4.11: Supervision Problem
Nominal Values
Set the Sense Voltage[V]. It must be in range of the Supervision values entered previously.
Set the, "Current Limit [A]" as needed for your application.
See the *00679.A3 manual for more details regarding Ramp Up, Down, Regulation settings, etc.
Download the latest manual at: http://file.wiener-d.com/documentation/PL506-PL512/
Fig. 4.12: Nominal Values
28. May 2013
20
*00679.A4