The Main Window; Description Of The Menu Items - Wiener PL512 Technical Manual

Now the USB driver software be installed. To access your power supply, execute the "WIENER
USB Power Supply Control" application via your start menu.
3.2

The Main Window

After starting the application the main window shows a channel overview.
The measured sense voltage (Usense), current (Imodule) and terminal voltage (Umodule) and a
global status of each
channel are displayed.
Clicking with the left
mouse button
channel toggles
power state (OFF → ON
or ON → OFF).
Clicking with the right
mouse button opens the
output configuration
menu of this channel.
3.3

Description of the Menu Items

File » Read Power Supply Configuration from File
●
Opens the Read Power Supply Data From File Dialog.
File » Save Power Supply Configuration to File
●
Saves the complete power supply configuration to disk.
Switch » All On
●
Switch » All Off
●
Switches all power supply channels on or off.
Switch » Group 1 On
●
Switch » Group 1 Off
●
Switch » Group 2 On
●
Switch » Group 2 Off
●
This are commands to demonstrate the grouping functions of the PL512/PL506. The default
factory setting is group 1 for channels 0..5 and group 2 for channels 6..11.
SelectOutput
●
28. May 2013
at a
the
12 *00679.A4