Appendix A: Data Sheet - Wiener PL512 Technical Manual

Appendix A: Data Sheet

Rated Input Voltage:
Rated Input Current:
Sinusoidal:
Inrush current:
Output Insulation (SELV) CE
DC Output power with different input voltages at the rated current (16A), calculated with typical
efficiency of 75%
115VAC / 1.380Wnom, 1580Wpeak
Regulation fast remote sense circuit (short sensed distance, sense connected to output at the
PBN506/PBN512 power bin):
Static:
Dynamic (0.5 m wire): MDC/M 2-8 V
Recovery Time:
Conditions
Regulation slow remote sense circuit (long sensed distance):
Static:
Dynamic:
Recovery Time (40m
wire, 5V at load side,
U < 2 V:
drop
28. May 2013
106 – 230 V AC, +/- 15% variation allowed
16 A
CE EN 60555, IEC 555 pow. fact. 0,98 (230VAC)
50/60 Hz
16 A, cold unit
EN 60950 , ISO 380, VDE 0805, UL 1950, C22.2.950
MDC/M 2-8 V / 30–60 V
MDC/M other voltages
other
MDC/M 2-8V
MDC/M 5-16V, 7-24V
MDC/M 30-60V
Current slope <1000A/ms, 20mF per 100A parallel to load
MDC/M 2-8V/ 30-60V
Other
Dynamic deviation depends on current slope resp. filter capacitors at load
side only
30m cable to load, 0,3mF capacitance at load side, 1V drop at nominal
load, 10% - 90 % load change with 3ms slope (50A output= 13,33A/ms)
leads to less than 10% temporary output voltage deviation
MDC 2-7V, 2-8V
Other
230VAC / 2.760W, 3170Wpeak
< 15 mV (+/-100% load, +/- full mains
range)
< 0.05 % (+/-100% load, +/- full DC
input range)
< 100 mV (50 % - 75 % load change)
< 0.7 % (50 % - 75 % load change)
1%: 0.2 ms (50 % - 75 % load change)
0.1%: 0.5 ms
1%: 0.0 ms (50 % - 75 % load change)
0.1%: 1.0 ms
1%: 0.5 ms (50 % - 75 % load change)
0.1%: 1.0 ms
< 15 mV (+/-100% load, +/- full mains
range)
< 0.05 % (+/-100% load, +/- full mains
range)
10%: <15 ms (50 % - 75 % load change)
1%: <25 ms
10%: <15 ms (50 % - 75 % load change)
1%: < 33 ms
33 *00679.A4