Installation - Wiener PL512 Technical Manual

Requirements
X86-Computer with USB connection (USB2 recommended)
●
Microsoft Windows XP/VISTA/& or W8
●
Features
Setup of the TCP/IP network parameters
●
Global overview of all power supply channels
●
Detailed configuration of the power supply channels
●
Save and reload of configuration data
●
3.1

Installation

The installation software (MUSEcontrol-x.x.x.x.msi) is free available at the download area of our
website (www.wiener-d.com
After downloading and executing the
software Windows may complain that the
supplier of the software could not be
verified. Ignore this warning and select
"Execute".
Next the MUSEcontrol Setup Wizard
welcome screen is displayed. Click "Next",
accept the license agreement and take a
look at the ReadMe notes.
Now you may
installation folder and start the installation.
Now connect the PL512/PL506 with your
mains supply and use an USB cable to connect the computer with the PL512/PL506.
The computer will detect the new connected hardware and ask to connect to Windows Update.
Select "No" and click "Continue".
Then accept the "Automatic install the software" selection by clicking "continue".
28. May 2013
The USB interface is primarily intended to be used to configure the power
supply. The Ethernet connection is designated for remote control and
monitoring.
→ Support → Downloads).
Please install the software before connecting the power supply to the USB. The
necessary USB-driver is included in the installation.
change the default
11 *00679.A4