Pl-506/512 Wiring And First Use Instructions; Power Bins Pbn506/Pbn512; Sense Connections / Mode - Wiener PL512 Technical Manual

4

PL-506/512 Wiring and First Use Instructions

4.1

Power Bins PBN506/PBN512

For easy exchange of the PL506 or PL512 Power Supply, (PS), the special bins PBN506/PBN512
are provided. The low voltage/high current cabling is connected to M6/M5 threaded bolts. For the
PL-512: Starting from left with U0, positive outputs up – negative outputs down.
Each sense connector of four output channels are connected to an eightfold plug-able terminal row.
Fig. 4.1: PL-512 Power Bin,
For the PL-506: Starting from left with U0+ and right U0-. Each sense line of two output channels
are connected to an eightfold plug-able terminal row. Last four terminals are unused.
Fig 4.2: PL-506 Power Bin, PBN506
4.2

Sense Connections / Mode

Jumper on: internal sense used,
No Jumper : external sense enabled
28. May 2013
PBN512
Fig. 4.3: PL-506, Sense Pin Header Jumpers
16 *00679.A4