Power Output And Sense Connections Pl512; Figure 2.3: Pl512 Rear Side (Power Output Connections); Table 6: Sense Connector Pin Assignment - Wiener PL512 Technical Manual

Operating Submenu
Mode
Change the TCP/IP address
Change the TCP/IP subnet mask
Change the TCP/IP gateway address
Allow writes (e.g. switch on/off) via the web
server
Change TCP/IP negotiation settings
Display of the ethernet hardware address (MAC).
This address is written at the type plate, too.
Change the TCP/IP port of the web server
Change the TCP/IP port of the SNMP server
Restore the default SNMP settings (community
strings)

2.10 Power Output and Sense Connections PL512

Figure 2.3: PL512 Rear Side (Power Output Connections)

The low voltage DC output at the rear side of the power supply is provided by 4 mm sockets The
channels are arranged from left to right starting with U0. Positive output is up and negative output is
down.
28. May 2013
Display
TCPIP
192.168.91.80
TCPIP
255.255.255.224
TCPIP
192.168.91.94
HTTP:read/write
TCPIPnegotiation
AutoNegotiation
TCPIP MAC Addres
0050-C22D-C231
HTTP Port
SNMP Port
SNMP Default
9
Address
SubnetMask
Gateway
80
161
No
*00679.A4