Maintaining Your Machine; Cleaning The Exposure Glass - Ricoh AFICIO MP 8000 Operating Instructions Manual

Maintaining Your Machine

If the exposure glass, exposure glass cover, or ADF belt is dirty, copy clarity may
be reduced. Clean these parts if they are dirty.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Cleaning the machine Wipe the machine with a soft, damp cloth, and then
wipe it with a dry cloth to remove the water.

Cleaning the Exposure Glass

The following procedure describes how to clean the exposure glass and the scan-
ning glass.
Clean 1 and 2.
Maintaining Your Machine
8
129