Ricoh AFICIO MP 8000 Operating Instructions Manual page 128

Problem
In Margin Adjustment
mode, parts of the origi-
nal image are not copied.
In Margin Adjustment
mode, parts of the origi-
nal image are not copied.
In Image Repeat mode,
the original image is not
copied repeatedly.
❖ Stamp
Problem
The stamp position is
wrong.
❖ Combine
Problem
You cannot make a book
from Booklet or Maga-
zine mode by folding
copies.
When using Combine,
parts of the image are not
copied.
Copies are not in correct
order.
Cause
You set a wide erased
margin.
There is a lack of margin
space on the opposite
side of the binding posi-
tion.
You selected copy paper
the same size as the origi-
nals, or you did not select
the proper reproduction
ratio.
Cause
The paper orientation is
wrong.
Cause
You selected a setting
("Open to left"or "Open
to right") that does not
match the orientation of
originals.
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
You placed the originals
in the incorrect order.
When You Cannot Make Copies As Wanted
Solution
Set a narrower margin with User Tools.
You can set the width between 0 - 30
mm (0" - 1.2").
See "Front Margin: Left/Right", "Back
Margin: Left/Right", "Front Margin:
Top/Bottom" and "Back Margin:
Top/Bottom", General Settings Guide.
Set a narrower margin with User Tools.
You can set the width between 0 - 30
mm (0" - 1.2").
See "Front Margin: Left/Right", "Back
Margin: Left/Right", "Front Margin:
Top/Bottom" and "Back Margin:
Top/Bottom", General Settings Guide.
Select copy paper larger than the origi-
nals or select the proper reproduction
ratio.
Solution
Check the paper orientation and stamp
position.
Solution
In [Copier / Document Server Features], un-
der [Edit], set [Orientation: Booklet, Maga-
zine] properly.
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure that the ratio matches your origi-
nals and the copy paper. Select the cor-
rect reproduction ratio before using
Combine mode.
When placing a stack of originals in the
ADF, the last page should be on the bot-
tom.
If you place an original on the exposure
glass, start with the first page to be cop-
ied.
2
27