Power Distribution Guidelines - Intel True Scale Fabric Switches 12200 Installation Manual

Table 5. System Power Attributes (Continued)
Model #
Inrush
Current
Power Factor
efficiency
Power Inlet
connector
# of Power
Inlets
Power Cord
connector
A.4.2

Power Distribution Guidelines

The following section details power distribution guidelines and recommendations for the
®
Intel 12800 series.
• The power supplies for the 12800 series have a maximum inlet current of 15amps
@ 110volts and 6amps @ 220volts. Please observe power outlet, power strip and
extension cable ratings.
• Do not exceed 80% of the ampere rating limit of the power outlet, power strip, or
extension cable that the equipment is plugged into. The power delivery system
must be set up so the power supplies do not overpower the maximum amperage of
any given system. For the 12800-360 and 12800-180 it is recommended to power
the systems over 220 volts.
Caution: High-powered systems, such as the 12800-180 and 12800-360 can place significant
loads on power distribution units (PDUs) and UPSs. It is recommended to measure the
total amperage and power that a PDU or UPS can handle.
True Scale Fabric Switches 12000 Series Hardware
Installation Guide
72
12800-360 12800-180
30Amps Max
99% @ 230V, full load
IEC320-C20
12 6
IEC320-C19
12000 Series Switches
12800-120 12800-040
4 4
Order Number: G91928004US
July 2015