Figure 21.
Cable Management Installation
9. If applicable, replace the door(s) on the rack.
2.6
12800-180 Installation
2.6.1
Mounting Hardware Kit Contents:
Note:
The mounting kit contains all of the necessary parts for installing and mounting the
switch into a 19" 4-post server rack, with a distance between front and rear rack posts
ranging from 28" - 33" (711mm - 838mm).
• Support Rails
• HAT Brackets
• C-Brackets
• #8–32 Flat Head Screws
• M6 Mounting Screws
• M6 Clip Nuts
True Scale Fabric Switches 12000 Series Hardware
Installation Guide
30
12000 Series Switches
July 2015
Order Number: G91928004US