Table of Contents
Advertisement
Figure 23.
Clip Nut Orientation
3. Install support rails in the rack. Fasten with two (2) M6 screws per EIA rail to pre-
installed clip nuts and torque to 30 in-lb.
Figure 24.
Support Rail Installation
4. Install four (4) rear mounting brackets to the chassis and fasten with #8–32
screws. There are four (4) screws per bracket. Torque to 30in-lb.
True Scale Fabric Switches 12000 Series Hardware
Installation Guide
32
12000 Series Switches
July 2015
Order Number: G91928004US
- Quick Links:
- Cable Requirements
Hide quick links:
Advertisement
Table of Contents
