Custom Audio Electronics KUBE II Scanner User Manual page 86

The "Setup.ini" ile is a coniguration ile that contains all the conigurable parameters listed in text format and divided into
some sections (indicated in square brackets).
The available values for every parameter, are listed after the parameter name. The value marked with the symbol ' * ' is the
default one. To modify device's parameters, change the numeric value after the name of parameters. To set the parameter
to the default value, change the numeric value with the symbol D.
The "Setup.ini" ile permits the coniguration of the following parameters:
[PRINT]
Print Mode
Autofeed
Chars / inch
Speed / Quality
Paper Width
Total cut ( i)
PaperEnd Buffer Clear
Binary Log File
PowerFail WakeUp Mode
Print Density
[INTERFACE]
RS232 Baud Rate
86
0*, 1
0*, 1
0, 1*
0, 1, 2*
9, 10, 11, 12, 13, 14*
0*, 1
0, 1*
0, 1, 2*
0, 1, 2, 3, 4*, 5, 6, 7, 8
1, 2, 3, 4, 5, 6, 7, 8*
0 = Normal
1 = Reverse
0 = CR disabled
1 = CR enable
0 = A=11 B=15 cpi
1 = A=15 B=20 cpi
0 = High Quality
1 = Normal
2 = High Speed
9 = 72 mm 12 = 78 mm
10 = 74 mm 13 = 80 mm
11 = 76 mm 14 = 82 mm
0 = Enabled
1 = Disabled
0 = Disabled
1 = Enabled
< Reserved >
0 = Always OFF
1 = Always ON
2 = LAST PWR State
0 = - 50 % 3 = - 12 %
1 = - 37 % 4 = 0 %
2 = - 25 % 5 = + 12 %
1 = 1200 bps 4 = 9600 bps
2 = 2400 bps 5 = 19200 bps
3 = 4800 bps 6 = 38400 bps
6 = + 25 %
7 = + 37 %
8 = + 50 %
7 = 57600 bps
8 = 115200 bps