Preset Position Tab - Sony SRG-X400 Operating Instructions Manual

Ramp curve (PAN TILT - RAMP CURVE)
Set the acceleration/deceleration curve for pan/tilt.
Note
It is fixed to [Mode 1] on this camera.
Slow Pan-Tilt mode (PAN TILT - PAN TILT SLOW)
Select the checkbox to set [Pan-Tilt] to [Slow Pan-Tilt
mode].
Preset
This is the setting related to the preset.
Speed select (PRESET RECALL - RECALL SPEED)
Select the preset recall speed.
[Compatible]: Work differently depending on the
commands for preset recall.
For VISCA command: Pan/tilt work with the
speed set by each preset.
For CGI command: Pan/tilt work with the speed
specified by the CGI command of preset recall.
[Separate]: Pan/tilt work with the speed set by each
preset.
[Common]: Pan/tilt work with the common speed
to all presets.
Common speed (PRESET RECALL - COMMON
SPEED)
This is enabled when [Speed select] is [Common].
Pan/tilt speed for preset recall, which is common to
all presets.
Pict freeze preset (PRESET RECALL - PICT FREEZE
PRESET)
Select output image state for preset recall.
When the checkbox is selected, frozen images are
output during preset recalling.
Preset mode (SYSTEM - PRESET MODE) (BRC-
X400/X401)
Set preset mode.
[Mode 1]: Recall all saved settings when recalling a
preset.
[Mode 2]: Recall only the pan, tilt, zoom, and focus
positions when recalling a preset.
[Trace]: Function to record the pan/tilt/zoom
operations to play them back when necessary.
PTZ mode
Set the pan/tilt control mode using the 8-
direction arrow buttons (page 63) and the zoom
control mode using the
63). Select [Normal] or [Step].
PTZ mode
[Normal]: When you click the mouse, the camera
starts panning, tilting or zooming, and the
operation continues while you hold down the
mouse. To stop the operation, release the
mouse.
/ buttons (page
[Step]: Each time you click the mouse, the camera
moves (pans, tilts or zooms) according to the
set level. If you keep the mouse held down
for 1 second or more, the operation mode is
temporarily changed to [Normal]. When you
release the mouse, camera operation stops
and the [Step] mode is restored.
When you select [Step], [Pan-Tilt level] and [Zoom
level] are available.
Pan-Tilt level
Select the camera transition level from [1] to [10] by
clicking the 8-direction arrow buttons for panning/
tilting. Selecting [10] provides the maximum
transition level.
Zoom level
Select the camera transition level from [1] to [10] by
clicking /
provides the maximum transition level.

Preset position tab

You can store camera pan, tilt, and zoom
positions up to 256 positions. For details on the
camera settings that can be stored, see "Preset
Items and Image Setting File Items" (page 96).
Notes
• All preset settings will return to their default
when changing the setting of [Image flip] in the
Installation tab.
Preset 1: The camera settings are reset to the
default settings.
Preset 2 to 256: The camera settings are
cleared from the memory.
Thumbnails are retained in the memory.
• The camera works with the setting registered
to Preset 1, when the power of the camera is
turned on. Register Preset 1 beforehand for
turning on the camera with the specific
settings.
89
for zooming. Selecting [10]