Operating A Camera Using The Remote Controller - Sony SRG-300SE Ipela User Manual

Memory
2 GB or more
Display
1600 × 1200 pixels or higher
* In case of Windows 8 or Windows 8.1, use the Internet Explorer desktop user interface (desktop UI) edition.

Operating a Camera Using the Remote Controller

What you can do with this system
To perform pan/tilt and zoom operations using the joystick of the remote controller, and to perform the Preset operation
using the button.
System Configuration
Camera
Notes
• Only RS-422 connection is available for VISCA CONTROL.
• You need to match the communication speed between the camera and the remote controller.
• If you change the settings of the communication speed and video format, operate it using the browser display via a
network.
* You cannot change the settings from the menu display connected with the SDI OUT connector.
For details concerning operation and the setting of the camera using the remote controller, see "Operation Using the
Remote Controller" on page 46 or "Setting with the Remote Controller" on page 51.
SDI OUT
VISCA RS-422
HD video monitor
Remote Controller
(not supplied)
Video signal
Remote Control (VISCA) signal
Signal flow
System Configuration
7