Table of Contents
Advertisement
Menu List
Functions and setting values for each menu item are as follows.
Factory default values are shown in bold (Ex.: Auto).
[Picture] menu
Picture
Menu items
Submenus and setting values Details
Exposure
Mode
Auto
Picture brightness
Manual
(exposure)
adjustment
High Sensitivity
Off
On
When in [Auto] mode
Area
Auto Exposure Level
Auto Exposure Speed
Full
Large
Middle
Spot
Slit
0 to 100% (80%)
–99 to 0 to +99 (+50)
Select a mode to adjust picture brightness.
Auto: Brightness is automatically adjusted.
Manual: Adjust the brightness manually. The shutter speed
and gain can be set.
Tips
• If the AUTO button is pressed when in [Manual] mode, the
camera will switch to [Auto] mode.
• When the AUTO button is pressed when in [Auto] mode, the
camera will switch to [Manual] mode.
Select whether to set the maximum gain to a high value and
operate with high sensitivity.
Off: Do not operate with high sensitivity.
On: Operate with high sensitivity.
Specify the metering area for exposure adjustment.
Full: Entire screen.
Large: Equal to [Full] vertically and 75% of [Full]
horizontally.
Middle: 75% of [Large] both vertically and horizontally.
Spot: 10% of [Large] both vertically and horizontally.
Slit: Equal to [Full] vertically and 10% of [Large]
horizontally.
Tip
Holding down the AUTO button displays the selected
monitoring area on the video monitor for 3 seconds.
Set the exposure level.
Select the amount of time needed (AE convergence time) to
achieve the correct exposure.
43
Advertisement
Table of Contents
