Table of Contents
Advertisement
Interfaces
NO.
ITEM
1
Cellular Main antenna connector
2
GPS antenna connector
3
Cellular AUX antenna connector
4
microSD™ card slot
5
SIM card slot
6
SIM tray eject button
7
Micro USB 2.0 OTG port
8
Reset button
9
Molex Mini-Fit™ Jr. 2 x 2 receptacle
10
LAN port
11
LAN/WAN port
NetComm Wireless 4G M2M Router
12
1
4
2
6
5
5
8
7
9
1
Figure 4 - Interfaces
SMA connector for main cellular antenna.
SMA connector for GPS antenna (not included in package).
SMA connector for auxiliary cellular antenna.
Insert a microSD™ card here to provide additional storage (Optional).
Insert SIM card here.
Press to eject the SIM tray
Provides connectivity for optional external storage or a USB Ethernet dongle. Supplies up to 0.5A to
connected device.
Press and hold for less than 5 seconds to reboot to normal mode. The LEDs are green and extinguish in
sequence to indicate that the router will reboot normally if the button is released during this period.
Press and hold for 5 to 15 seconds to reboot to recovery mode. The LEDs are amber and extinguish in
sequence to indicate that the router will reboot to recovery mode if the button is released during this
period.
Press and hold for 15 to 20 seconds to reset the router to factory default settings. The LEDs are red and
extinguish in sequence to indicate that the router will reset to factory default settings if the button is
released during this period.
Connect the provided power supply here. The Molex receptacle provides:
Ground (−)
Power (+)
I/O terminal
(i) ignition input detection terminal.
LAN port for wired Ethernet clients.
LAN or WAN port for wired Ethernet clients or to bridge another network connection.
Table 6 – Interfaces
3
10
11
DESCRIPTION
www.netcommwireless.com
UM-00012 v1.0
Advertisement
Table of Contents
