Table of Contents
Advertisement
Advanced configuration
The NTC-140-02router comes with pre-configured settings that should suit most customers. For advanced configuration, log in to
the web-based user interface of the router.
To log in to the web-based user interface:
1.
Open a web browser (e.g. Internet Explorer®, Mozilla Firefox® or Google Chrome™.™.), type
address bar and press Enter. The web-based user interface log in screen is displayed.
2.
Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the "root" or "admin" accounts, you can use one of the default account details to log in.
Note:
The admin manager account allows you to manage all settings of the router except functions such as firmware upgrade,
device configuration backup and restore and reset to factory default settings, which are privileged only to the root manager
account.
For security reasons, we highly recommend that you change the passwords for the root and admin accounts upon initial
installation. You can do so by navigating to the System and then Administration page.
The Status page is displayed when you have successfully logged in.
www.netcommwireless.com
UM-00012 v1.0
Figure 12 – Log in prompt for the web-based user interface
ROOT MANAGER ACCOUNT
Username:
root
Password:
admin
Table 8 - Management account login details – Root manager
ADMIN MANAGER ACCOUNT
Username:
admin
Password:
admin
Table 9 - Management account login details – Admin manager
http://192.168.1.1
into the
NetComm Wireless 4G M2M Router
17
Advertisement
Table of Contents
