Table of Contents
Advertisement
Physical Dimensions and
Indicators
LED Indicators
The 3G36W-V has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The display
is visible on the front of the 3G36W-V to provide you with information about network activity and the device status. See below for an
explanation of each of the indicator lights.
Integrated Interfaces
The following integrated interfaces are available on the 3G36W-V:
YML36W-VX
www.netcomm.com.au
LED INDICATOR
Wi-Fi
WAN/LAN
LAN
3G
Power
INTERFACE
Insert your SIM card here (until you hear a click). Please be careful to insert the SIM in the
SIM Slot
correct orientation by viewing the printed icon.
3G Antenna
Attach in the 3G Antenna here in a clockwise direction.
Switchable LAN/ WAN Ethernet port for Fixed Line (ADSL/Cable/Satellite) connection or
LAN/WAN
wired Ethernet clients (Computers, Laptops, etc)
LAN
LAN Port for wired Ethernet clients (Computers, Laptops, etc)
Hold this button down for over 10 seconds to reset to factory defaults. Hold and release this
Reset/WPS
button for less than 10 seconds to enable the WPS push-button-connect function.
Power
Power connector, connects to a DC 12V 1.5A Power Adapter
ICON
Solid blue light when WLAN is enabled. Blinks on traffic (data transfer)
LAN mode: Solid blue light when the router is connected via the LAN
Ethernet Port
WAN mode: Lights up when the router is connected to the internet via
a fixed line WAN connection
Solid blue light when specific LAN connection is established. Blinks on
LAN port traffic
Solid blue light when the 3G36W-V is connected via 3G, blinks on
traffic
Solid amber light when device is powered on. Blinking during device
start up.
Table 2 - LED Indicators
FUNCTION
Table 3 - Rear Panel Ports
Videotron – 3G36W-V
DEFINITION
3G36W-V User Guide
6
Advertisement
Table of Contents
