Table of Contents
Advertisement
ITEM
System information
System up time
Board version
Serial Number
Firmware version
Model
Module firmware
IMEI
LAN
IP
MAC Address
Ethernet Port Status
WAN
Priority
External Storage
USB-OTG
SMS status
Received message count
Event notification
Event count
Cellular connection status
SIM Status
Signal strength (dBm)
Network registration status
Operator selection
Current operator
Roaming status
Allowed bands
Current band
Coverage
WWAN Connection Status
Profile name
Status
Default profile
WWAN IP
DNS server
APN
Connection uptime
Advanced status
Mobile country code
Mobile network code
DC input voltage
HSUPA category
HSDPA category
SIM ICCID
www.netcommwireless.com
UM-00012 v1.0
The current uptime of the router.
The hardware version of the router.
The serial number of the router.
The firmware version of the router
The type of phone module and the firmware version of the module.
The firmware revision of the phone module.
The International Mobile Station Equipment Identity number used to uniquely identify a mobile device.
The IP address and subnet mask of the router.
The MAC address of the router.
Displays the current status of the Ethernet port and its operating speed.
Displays the priority of the available WAN connections.
Lists the type and size of external storage (onboard/USB), if connected.
Displays the current status of the USB-OTG port (Device or host mode)
Displays the number of SMS messages received by the router.
Displays the number of notifications sent using the Event notification feature.
Displays the activation status of the SIM in the router.
The current signal strength measured in dBm
The status of the router's registration for the current network.
The mode used to select an operator network.
The current operator network in use.
The roaming status of the router.
The bands to which the router may connect.
The current band being used by the router.
The type of mobile coverage being received by the router.
The name of the active profile.
The connection status of the active profile.
Indicates whether the current profile in use is the default profile.
The IP address assigned by the mobile broadband carrier network.
The primary and secondary DNS servers for the WWAN connection.
The Access Point Name currently in use.
The length of time of the current mobile connection session.
The Mobile Country Code (MCC) of the router.
The Mobile Network Code (MNC) of the router.
Displays the current voltage of the power input source provided via the DC Input jack
Displays the HSUPA category (1-9) for the current uplink
Displays the HSDPA category (1-8) for the current downlink.
The Integrated Circuit Card Identifier of the SIM card used with the router, a unique number up to 19 digits in length.
DEFINITION
NetComm Wireless 4G M2M Router
19
Advertisement
Table of Contents
