NetComm NTC-140-02 User Manual page 106

Send SMS to connect the data
connection
Send multiple get command
Send multiple set command
Send SMS to reset to factory default
settings
Send SMS to retrieve status of
router
Send SMS to retrieve the history of
the session, including start time, end
time and total data usage
Send SMS to configure the router to
send syslog to a remote syslog
server
Send SMS to wake up the router,
turn on the default gateway and
trigger the 'connect on demand'
profile if in waiting state.
Send SMS to perform firmware
upgrade when firmware is located
on HTTP server
Send SMS to perform firmware
upgrade when firmware is located
on FTP server
Send SMS to download and install
IPK package located on HTTP
server
Send SMS to download and install
IPK package located on FTP server
Send SMS to turn off PPPoE
Send SMS to retrieve the PPPoE
status, currently configured dial
string and service name
Send SMS to set the LED mode
timeout to 10 minutes
Send SMS to retrieve the current
LED mode
Retrieve current SSH protocol
Select SSH protocol
Retrieve password authentication
status
Enable/disable password
authentication on host
NetComm Wireless 4G M2M Router
106
Required PASSWORD execute pdpup
Not required get wanip;
Required PASSWORD get
Not required set ssh.genkeys=1; set username=test; set auth=pap
Required PASSWORD set ssh.genkeys=1; set username=test; set auth=pap
Not required execute factorydefaults
Required PASSWORD execute factorydefaults
Not required get status
Required PASSWORD get status
Not required get sessionhistory
Required PASSWORD get sessionhistory
Not required set syslogserver=123.209.56.78
Required PASSWORD set syslogserver=123.209.56.78
Not required execute wakeup
Required PASSWORD execute wakeup
execute download
Not required
execute download
PASSWORD execute download
Required
PASSWORD execute download
http://download.com:8080/firmware_image_r.cdi
execute download
ftp://username:password@download.com/firmware_image.cdi
Not required
execute download ftp://username:password@
download.com/firmware_image_r.cdi
PASSWORD execute download ftp://username:password@
download.com/firmware_image.cdi
Required
PASSWORD execute download ftp://username:password@
download.com/firmware_image_r.cdi
Not required execute download
Required PASSWORD execute download
execute download ftp://username:password@
Not required
download.com:8080/package.ipk
PASSWORD execute download ftp://username:password@
Required
download.com:8080/package.ipk
Not required set pppoe=0
Required PASSWORD set pppoe=0
Not required get pppoe
Required PASSWORD get pppoe
Not required set ledmode=10
Required PASSWORD set ledmode=10
Not required get ledmode
Required PASSWORD get ledmode
Not required get ssh.proto
Required PASSWORD get ssh.proto
Not required set ssh.proto=1
Required PASSWORD set ssh.proto=1
Not required get ssh.passauth
Required PASSWORD get.ssh.passauth
Not required set ssh.passauth=1 or set ssh.passauth=0
Required PASSWORD set ssh.passauth=1 or PASSWORD set ssh.passauth=0
get rssi
wanip; get rssi
http://download.com:8080/firmware_image.cdi
http://download.com:8080/firmware_image_r.cdi
http://download.com:8080/firmware_image.cdi
http://download.com:8080/package.ipk
http://download.com:8080/package.ipk
www.netcommwireless.com
UM-00012 v1.0