Indicators; The Led - Psion Teklogix Workabout Pro Quick Start Manual

If the touchscreen has never been calibrated or if the stylus pointer is
not accurate when you tap on an item:
• In the
Control Panel,
tab, and then tap on the
• Follow the onscreen directions to calibrate the display.

2.5 Indicators

WORKABOUT PROs use an LED (Light Emitting Diode),
onscreen messages and audio tones as indicators.

2.5.1 The LED

A single, two-coloured LED is located on the left side of the unit,
just above the <BKSP> key. When you press <ENTER/ON>, the
LED flashes green to indicate that the unit has been powered up. The
LED table below outlines the behaviour of the LED while the unit is
docked in a charger.
Keep in mind that the application running on the WORKABOUT
PRO can dictate how the LED operates. Review the documentation
provided with the application to determine LED behaviour.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
choose the
Stylus
<Recalibrate>
icon, select the
button.
Calibration
15