Serial (Com) Port Assignments - Psion Teklogix OMNii HDK XT10 User Manual

Table of Contents

4.6

Serial (COM) Port Assignments

The default serial port assignments for Omnii are shown in the following table. Ports not listed

are unassigned.

Table 4.5 Default Omnii Serial (COM) Port Assignment

Serial

Port

COM2:

GPS

COM5:

External USB-serial dongle External USB-to-serial adaptor dongle WA4015 can be plugged

COM6:

USB port replicator

COM7:

COM8:

WWAN virtual serial port

COM18

WWAN hardware (private) Reserved for internal use.

COM19

GPS hardware (private)

COM20

Bluetooth hardware

(private)

COM24

GPS power (private)

COM30

Expansion UART1

COM31

Expansion UART2

COM32

Expansion UART3

COM33

Internal scanner port

Note: 1. The proper name for COM ports above COM9 is \$device\COMxx

(no ":" following the COM port number).

2. COM ports cannot be reassigned on the Omnii.

3. Bluetooth creates and destroys many virtual ports.

Default Assignment

This COM port is opened by applications that require GPS data.

This COM port may instead be opened by the GPS

intermediate driver.

into USB-A port on desktop dock and snap module.

RS-232 port on portable docking module.

RS-232 port on desktop docking station.

RS-232 port on vehicle cradle.

Internal USB-to-serial converter in the desktop dock XMOD

option, snap-module, and vehicle cradle.

Reserved for future use.

WWAN not available on the Omnii XT10.

Reserved for internal use.

Chapter 4: Software