Keyboard Modules; Keyboard Overlays; Keyboard Hard Caps - Psion Teklogix OMNii HDK XT10 User Manual

Table of Contents

Advertisement

5.4.6

Keyboard Modules

Custom keyboard overlays and hard caps may be developed for use on Omnii. The HDK provides
PDF files with details of the artwork that is used on the factory-installed components so that
the colours may be faithfully reproduced to maintain the contrast, visibility and overall look
of the unit.

5.4.6.1 Keyboard Overlays

This section describes the specifics of designing and installing new keyboard overlays on Omnii.
Table 5.13 Associated Files for Keyboard Overlays
Artwork for the 36-key, alpha modified, numeric calculator,
12 Fn keyboard overlay
Artwork for the 36-key numeric telephony, 12 Fn keyboard overlay KB_Overlay_36NumTel12.pdf
Artwork for the 59-key, alpha ABC, numeric telephony, 6 Fn
keyboard overlay
The factory keyboard overlay may be replaced with a custom keyboard overlay. There are two
form factors of Omnii keyboards: a 36-key numeric format, and a 59-key full alphanumeric
format. Make sure you use the correct files and parts for your keyboard type.
You can install the custom overlay on an existing keyboard bezel, provided you first remove (peel
off) the factory-installed overlay. Clean the bezel surface thoroughly with isopropyl alcohol to
remove all traces of the old adhesive before installing the new overlay.
If you wish to install the overlay on a new keyboard bezel, or if you need to replace a damaged
bezel, blank ones can be ordered using the following part numbers:
Table 5.14 Blank Keyboard Bezel Part Numbers
Part Number
1004988
1004982

5.4.6.2 Keyboard Hard Caps

This section describes the specifics of designing and installing new keyboard hard caps on Omnii.
Table 5.15 Associated Files for Keyboard Hard Caps
Artwork for the 36-key, alpha modified, numeric calculator,
12 Fn keyboard hard caps
Artwork for the 36-key numeric telephony, 12 Fn keyboard
hard caps
Artwork for the 59-key, alpha ABC, numeric telephony, 6 Fn

keyboard hard caps

Description
Keyboard Bezel Form Factor
59-key alphanumeric
36-key numeric
Description
Chapter 5: Mechanical Considerations

Keyboard Modules

Filename
KB_Overlay_36ModNumCal12.pdf
KB_Overlay_59ABCTel6.pdf
Filename
KB_HardCaps_36ModNumCal12.pdf
KB_HardCaps_36NumTel12.pdf
KB_HardCaps_59ABCTel6.pdf
Psion Teklogix Omnii HDK User Manual
75

Advertisement

Table of Contents
loading

Table of Contents