Main Tabs; Usb - Psion Teklogix OMNii HDK XT10 User Manual

Table of Contents

10.6.2 Main Tabs

There are four main tabs in the HDK Demo application: USB, UART, GPIO and EEPROM.

Tap on the tab that corresponds to the device attached to the expansion port (USB, UART or

GPIO), or tap on the EEPROM tab to access the read/write functions of the 1-wire EEPROM of

the device.

•

Home – Tap this button to return to the Home screen and select a different expansion port.

•

Tabs – The features of each tab and instructions on how to use them are described in the fol-

lowing sections.

The USB tab provides an interface to communicate with all USB storage devices connected to

Omnii, including those connected via expansion ports.

File Edit Buttons

File Browsing

Window

•

File Browsing Window – The file systems of all USB drives enumerated by Omnii are dis-

played in the browsing window. The file systems can be navigated as in a standard Windows

Explorer window – single-tap an object to highlight it; double-tap an object to

open it.

•

File Edit Buttons – These buttons allow you to move and copy files within the file system of

the USB device.

- Cut – Flag the currently highlighted object for relocation to another folder in the file

system. The object will not be removed until the Paste button is clicked.

- Copy – Flag the currently highlighted object for duplication in another folder in the

file system.

Tabs

Chapter 10: HDK Demo Application

Home

Psion Teklogix Omnii HDK User Manual

151

Table of Contents