Can-Am Spyder RT Operator's Manual page 51

Hide thumbs Also See for Spyder RT:
Table of Contents

Advertisement

Installation
rmo2010-008-003_n
INSTALLATION SEQUENCE
Reinstall side panel in the reverse order
of the removal.
Top Side Panel
Removal
1. Open seat.
2. Open front storage compartment.
3. Remove side panel.
4. Remove retaining screws from
lower wind deflector.
rmr2010-038-004_a
1. Retaining screws of wind deflector
5. Remove mirror:
5.1 Push firmly on the top front of
the mirror towards the rear of
the vehicle.
5.2 Push up firmly on the outer-
most part of the mirror.
rmr2010-038-004_b
Step 1: Push towards the rear
Step 2: Push up
6. Remove upper retaining screws
from top side panel.
rmr2010-038-005_a
1. Upper retaining screws
7. Remove rear retaining screw from
top side panel.
rmr2010-038-006_a
1. Rear retaining screw
8. Remove left service cover by re-
moving plastic rivet.
_______________
EQUIPMENT
49

Advertisement

Table of Contents
loading

Table of Contents