License Plate Light
1. Remove the lens screws with a
Phillips head screwdriver.
rmo2010-001-080_a
1. License plate lens screws
2. Pull out the lens.
3. Remove the bulb by pulling it out.
rmo2010-001-081_a
1. Pull out
4. Install the new bulb by pushing it in.
5. Reinstall the lens.
Backup Light
1. Open the top storage compartment.
2. Open the side storage compart-
ments.
3. Remove the 8 retaining screws
from the rear panel.
rmo2010-001-082_a
1. Rear panel
2. Retaining screws
4. Pull out panel.
rmo2010-001-083
5. Unplug connector.
6. Turn the bulb counterclockwise to
unlock it.
rmo2010-001-084_a
1. Turn counterclockwise
7. Pull bulb out.
______________
HOW TO REPLACE FUSES AND LIGHTS
157