Can-Am Spyder RT Operator's Manual page 168

Hide thumbs Also See for Spyder RT:
Table of Contents

Advertisement

SPECIFICATIONS
COOLING SYSTEM
Type
Coolant
ELECTRICAL SYSTEM
Ignition system type
Ignition timing
Spark plug
Engine RPM limiter setting Forward
Battery
Headlight
Fog light (Spyder RT-S)
Taillight/brake light
Turn signal lights
Position lights
License plate light
Backup light
Front storage compartment light
(Spyder RT-S/LTD)
Fuses
______________
166
MODEL
Type
Capacity
Quantity
Make and type
Gap (not adjustable)
Type
Voltage
Nominal rating
Recommended
charging rate
Front
Rear
SPYDER RT
Liquid cooled, double radiator with cooling fans
Ethyl glycol/water mix (50% coolant, 50% distilled
water). Use premixed coolant sold by BRP
LIFE ANTIFREEZE (P/N 219 702 685)
specifically designed for aluminum engines
3.75 L (.99 U.S. gal.)
Electronic ignition with dual output coil
Not adjustable
NGK MR7BI-8 (iridium) or equivalent
(apply heat-sink paste P12
(P/N 420 897 186) or equivalent on spark plug threads)
0.7 mm to 0.8 mm (.028 in to .031 in)
8100 RPM with engaged drivetrain
7500 RPM with open clutch or on neutral
Yuasa YTX24HL-BS
2 x 60 W halogen (type H4)
2 x 35 W halogen
LED 3.1 W total
LED 4.5 W each side
HOW TO REPLACE FUSES AND LIGHTS
Refer to
or coolant
3
12 volts
21 A•h
2 A
2 x 10 W
2 x 5 W
5 W
2 x 20 W
0.2 W
LONG

Advertisement

Table of Contents
loading

Table of Contents