11) Reverse Button; Ptt (Push To Talk) Button - Can-Am Spyder RT Operator's Manual

rmo2010-001-021_a
RECC BUTTONS
1. MODE button: Navigate
through the screens
Holding button more than 2
seconds in main screen: activates or
deactivates ECO mode
2. SET button:
Quick press then release: Navigates
through the secondary screens
Holding button more than 1 second: Sets
a value in the current function or navigate
to a setup screen
3. UP button: Increase the volume (audio) or
a value
4. DOWN button: Decrease the volume
(audio) or a value
5. LEFT button: Move the screen arrows to
the left to select a secondary menu or a
setting
6. RIGHT button: Move the screen arrows
to the right to select a secondary menu or
a setting
WARNING
Using the RECC while driving can
distract the driver from operating
the vehicle. Always use buttons
with caution and always keep your
eyes on the road.

11) Reverse Button

The reverse button is located on top of
the left handlebar housing.
rmo2010-001-020_e
TYPICAL
1. Reverse button
Push and hold the reverse button to
allow shifting into reverse. Refer to
OPERATING IN REVERSE
PROCEDURES
instructions.
The backup lights turn on when the ve-
hicle is in reverse.
12) PTT (Push To Talk)
Button
The PTT button is located on the left
handlebar housing facing the clutch
lever.
rmo2010-001-040_a
1. PTT button
When an optional CB (Citizens' Band) is
installed, pressing the button sets the
CB in transmitting mode to talk to other
parties.
_______________
SECONDARY CONTROLS
in
subsection for detailed
BASIC
23