Table of Contents
Advertisement
MULTIFUNCTION GAUGE
Trip Meter Screen
1
2
rmo2015-001-100aen
TYPICAL
1. Display selection: Trip A or Trip B
2. Pause or resume the selected trip meter
3. Reset the selected trip meter
Press the LEFT/RIGHT button to select
the desired trip meter.
Press the UP button to pause or re-
sume the selected trip meter.
Press the DOWN button to reset the
selected trip meter.
Preferences Screen
rmo2015-001-111_aen
st
1. 1
column: Main category
nd
2. 2
column: Secondary category or item
3. 3
rd
column: Unit or setting
This screen is only available when vehi-
cle is stopped.
Use the LEFT/RIGHT button to select
the desired column.
______________
34
3
Within a column, use the UP/DOWN
button to select the desired item. If
more items are available to the next
right column, use the RIGHT button
to select the column then use again
the UP/DOWN button to select the de-
sired item. Continue using this pattern
to reach the desired item.
When an item is selected, this sets
the item to the current value. You may
then go to any screen, the value will be
kept.
rmo2015-001-110_aen
1. The selected value will be set
NOTE: When in the 2
you can go back to the column at the
left using the LEFT button.
NOTE: When the units are changed
they will be changed on both the ana-
log and the digital displays. The units
will be used for the odometer and both
trip meters.
Setting the Time
To set the hours:
Select CLOCK in main category of Pref-
erences Screen.
nd
or 3
rd
column,
Advertisement
Table of Contents
